Geoenvironmental Engineering

COVID-19 has spurred investments in air filtration for K-12 schools – but these technologies aren’t an instant fix

Anonymous — Tue, 24 Aug 2021 22:02:32 +0000

COVID-19 has spurred investments in air filtration for K-12 schools – but these technologies aren’t an instant fix Anonymous (not verified) Tue, 08/24/2021 - 16:02

The COVID-19 pandemic has brought increased attention to indoor air quality and the effect that ventilation has on reducing disease transmission in indoor spaces. A recent infrastructure survey reported that of the nearly 100,000 operating public school buildings across the U.S., more than a third have an immediate need for upgrades to the ventilation systems that help control indoor air quality and the spread of “aerosols.”

Aerosol is the term used to describe the millions of microscopic particles that float in air – both indoors and out. People constantly inhale and exhale aerosols, some of which include allergens, particles from automobile exhaust, wildfire ash and microbes.

Our University of ŷ��ڱ��Ƶ environmental engineering team has been studying the microbiological components of indoor air, called “bioaerosols”, for more than 25 years. We have surveyed the ventilation systems of hundreds of K-12 classrooms, health care facilities and restaurants. And we have provided facilities managers with affordable plans to improve indoor air quality.

Our own work as well as others’ has found that many classrooms are unfortunately poorly ventilated, and that better ventilation can reduce student absences due to illness – both during a pandemic and more normal times.

After surveying the installation of air filtration systems over the past year, we found that they can significantly improve air quality in classrooms by lowering aerosol levels, which in turn lowers COVID-19 transmission risk. But effective installation is key.

A new age of filtration

As the pandemic continues to highlight the need for better ventilation and indoor air quality, many academic institutions, government agencies, nongovernmental organizations and professional building science societies have been promoting better building-management practices to improve school ventilation.

Some building scientists have called for bringing the ventilation conditions in schools up to the levels prescribed for medical clinics. Unfortunately, the infrastructure investments required for that level of upgrade are well out of practical reach for many public buildings: Between 2008 and 2017 alone, state capital funding for schools was cut by $20 billion, or 31%.

In the absence of funding for major building upgrades, simple in-room filtration technologies have been installed in some schools to improve ventilation in classrooms where many students spend their days in close quarters. However, these filters have only been deployed in a small fraction of public schools across the country.

This technology, called high efficiency particulate air (HEPA) filtration, was born in the aerospace industry more than 50 years ago. HEPA filtration has been proved to efficiently remove microscopic airborne particles – including respiratory viruses – from air in higher occupancy spaces like classrooms.

Over the past few years, a new generation of HEPA filters have emerged from the U.S. commercial sector. These filters are more compatible with educational settings and less intrusive than their research-grade counterparts that are commonly used in the aerospace and pharmaceutical sectors, where “clean rooms” are needed. These latest models include improvements like multidirectional intake, reduced noise, lower power requirements, better durability and relatively small footprints.

HEPA filters have also become more widely used over the past couple of decades in homes in response to the recognition of rising asthma rates among children. But until the COVID-19 pandemic, they were rarely used in public school settings.

Bringing fresher air to classrooms

Over the 2021 spring academic semester, our team installed hundreds of new HEPA filters in public elementary classrooms in Denver, ŷ��ڱ��Ƶ, the largest metropolitan school district in the Mountain West. These upgrades were possible due to a recent industry-university cooperative effort between the University of ŷ��ڱ��Ƶ, the Intel foundation and the Carrier Corporation, a multinational ventilation equipment company. Together, these organizations contributed more than $500,000 for large-scale ventilation assessments, HEPA filter installations and other air quality improvements for Denver-area schools.

University of ŷ��ڱ��Ƶ, Boulder, professor Mark Hernandez, engineering student Ricardo Reyes and architecture student Halle Sago take microbial counts on a classroom desk in Boulder in spring 2021. Glenn Asakawa/ŷ��ڱ��Ƶ Boulder, CC BY-ND

A yet-unpublished poll of teachers in many of those classrooms overwhelmingly reported that this new generation of HEPA filters were welcome and easy to accommodate in their classrooms.

But like all engineering solutions, air filter effectiveness depends on proper installation. Our team’s field studies demonstrate that a simple “plug-and-play” approach will not address the complicated reality of aerosol exposures in densely occupied classrooms. In many situations, we have found HEPA filters that were undersized and placed inappropriately – such as facing a wall or in a remote corner – and sometimes not even turned on.

Networks of HEPA filters need to be thoughtfully installed, and the process must take into consideration other factors such as existing ventilation system performance, ceiling height, desk layouts and the presence or absence of ceiling fans. HEPA filters can only work up to their full potential if schools have the right number of them, they are the appropriate size and are placed in optimal positions.

The best HEPA filter installations consider details like student seating charts, high traffic areas and other variables based on student behaviors. Fortunately, building facility managers and custodial staff can be trained, with modest time investment, to install, operate and maintain HEPA filters in classrooms, with minimal distraction to teachers.

Air quality improvements are an investment in health and education

A 2020 review on indoor air quality strategies estimates that an individual HEPA filter, sized for elementary school classrooms with average energy use, costs about $361. This is consistent with our team’s experience in the Denver Public Schools system, where we typically installed at least two units per classroom at a cost of less than $800 per room. We estimate that this is roughly equal to the cost of one extra textbook per student over an academic year. In our opinion, that is well worth the potential improvement in indoor air quality in classrooms.

In-room HEPA filtration is a long-term investment that supplements existing ventilation systems. And though COVID-19 was the impetus for the installation of many HEPA filters, they are effective for far more than just reducing exposures to airborne viruses. Well-maintained and properly functioning filtration systems also reduce exposure to wildfire ash that can penetrate buildings, as well as allergens and other unwanted particles like automobile exhaust, tire detritus and construction dust.

But even the best indoor HEPA filtration cannot guarantee protection from airborne respiratory threats in schools. HEPA filters are effective only as part of an integrated approach. Ultimately, masks, distancing and reducing the number of students packed into tight spaces will determine how well students are protected from COVID-19.

HEPA filters are the modern analogy of “seat-belts” for indoor air quality in the age of COVID-19. If fitted correctly, they can only help lower the exposures to COVID-19 and other aerosols that students experience during their school days.

[Understand new developments in science, health and technology, each week. Subscribe to The Conversation’s science newsletter.]

Off

Traditional

White

ŷ��ڱ��Ƶ researchers contribute to frost quake modeling research

Anonymous — Mon, 16 Nov 2020 17:23:02 +0000

ŷ��ڱ��Ƶ researchers contribute to frost quake modeling research Anonymous (not verified) Mon, 11/16/2020 - 10:23

Frost quakes are not particularly rare, but they are harder to observe than traditional earthquakes. Professor Roseanna Neupauer was part of a recent effort to develop new models with the Oulu, Finland, 2016 quake data, the results of which are discussed in a new paper published in the Journal of Geophysical Research.

Off

Traditional

White

Bielefeldt Becomes Second in College to be Named ASEE Fellow

Anonymous — Thu, 25 Apr 2019 14:16:19 +0000

Bielefeldt Becomes Second in College to be Named ASEE Fellow Anonymous (not verified) Thu, 04/25/2019 - 08:16

Professor Angela Bielefeldt has been selected as a fellow by the American Society for Engineering Education (ASEE). Bielefeldt is only the second College of Engineering and Applied Science faculty member to be honored as an ASEE fellow, joining Jacquelyn Sullivan of Engineering Plus.

Her selection as a fellow highlights the commitment and effort that Bielefeldt has made to educate students and to improve engineering education through her research.

Along with classes that prepare students for their careers by teaching ethics and professional issues, Bielefeldt has focused her research on improving engineering education and Scholarship of Teaching and Learning . Key topics of her research include engineering ethics, social responsibility, sustainability, service-learning and leadership.

Bielefeldt has served in many roles with ASEE, including current chair of the Community Engagement Division and former service as chair (and other officer roles) for both the Environmental Engineering Division and the Rocky Mountain Section.

She is a member of the American Society of Civil Engineers Body of Knowledge 3 Task Committee and the American Association for the Advancement of Science (AAAS) Committee on Scientific Freedom and Responsibility. In addition to her selection as ASEE fellow, she was honored as a 2019 President’s Teaching Scholar by ŷ��ڱ��Ƶ.

“I am greatly honored to be selected as an ASEE fellow,” Bielefeldt said. “I have attended the ASEE annual conference every year since 2003. Every year it is wonderful to reconnect with colleagues who share my passion for engineering education. This amazing and supportive group keeps me motivated, and pushes me to continuously strive to improve my teaching.”

Bielefeldt will be recognized at the 2019 ASEE Annual Conference and Exposition in Tampa, Florida, on June 19. The ceremony is one of the high points of the society’s Annual Conference and Exposition, which will be held June 16-19 at the Tampa Convention Center.

The ASEE was founded in 1893 to improve engineering education and advocate for its societal benefits. They develop policies to ensure that engineering educational programs meet modern technological and industry demands and work to grow student participation in engineering.

The grade of fellow is one of professional distinction and is conferred by the board of directors upon an ASEE member with outstanding and extraordinary qualifications and experience in engineering or engineering technology education or allied field, who has made appropriate and important individual contributions to engineering or engineering technology education, as well as considerable individual contributions to ASEE.
The ASEE bylaws limit the number of members who can be advanced to fellow grade in any one year to a total equal to one-tenth of 1 percent of the ASEE individual membership.

Off

Traditional

White

Geoenvironmental Engineering

COVID-19 has spurred investments in air filtration for K-12 schools – but these technologies aren’t an instant fix

How The Conversation is different: We explain without oversimplifying.

A new age of filtration

Bringing fresher air to classrooms

Air quality improvements are an investment in health and education

Off

ŷ���ڱ���Ƶ researchers contribute to frost quake modeling research

Off

Bielefeldt Becomes Second in College to be Named ASEE Fellow

Off

ŷ��ڱ��Ƶ researchers contribute to frost quake modeling research